2025-07-25 21:32.36: New job: test ahrefs/devkit https://github.com/ahrefs/devkit.git#refs/heads/emile-command-pipe (a249da8c3774c73b5ab025e54cb5bfb27f9e7b96) (linux-x86_64:fedora-42-4.14_opam-2.3)Base: ocaml/opam:fedora-42-ocaml-4.14@sha256:92a2dfcbfadc0b877c4c07531e6c17e01d81a35f590c259ac6ee644491c96ca9Opam project buildTo reproduce locally:git clone --recursive "https://github.com/ahrefs/devkit.git" -b "emile-command-pipe" && cd "devkit" && git reset --hard a249da8ccat > Dockerfile <<'END-OF-DOCKERFILE'FROM ocaml/opam:fedora-42-ocaml-4.14@sha256:92a2dfcbfadc0b877c4c07531e6c17e01d81a35f590c259ac6ee644491c96ca9# fedora-42-4.14_opam-2.3USER 1000:1000ENV CLICOLOR_FORCE="1"ENV OPAMCOLOR="always"WORKDIR /srcRUN sudo dnf install -y findutilsRUN sudo ln -f /usr/bin/opam-2.3 /usr/bin/opamRUN opam init --reinit -niRUN uname -rs && opam exec -- ocaml -version && opam --versionWORKDIR /srcRUN sudo chown opam /srcRUN cd ~/opam-repository && (git cat-file -e b8021439f8c57ba6435bc2263f6596671f4f4466 || git fetch origin master) && git reset -q --hard b8021439f8c57ba6435bc2263f6596671f4f4466 && git log --no-decorate -n1 --oneline && opam update -uCOPY --chown=1000:1000 devkit.opam ./RUN opam pin add -yn devkit.dev './'RUN echo '(lang dune 3.0)' > './dune-project'ENV DEPS="astring.0.8.5 base-bigarray.base base-bytes.base base-threads.base base-unix.base camlzip.1.13 conf-libcurl.2 conf-libevent.1 conf-libpcre.2 conf-pkg-config.4 conf-zlib.1 cppo.1.8.0 csexp.1.5.2 cstruct.6.2.0 curl.0.10.0 curl_lwt.0.10.0 dune.3.19.1 dune-compiledb.0.6.0 dune-configurator.3.19.1 extlib.1.8.0 extunix.0.4.3 ezjsonm.1.3.0 fmt.0.10.0 fpath.0.7.3 hex.1.5.0 jsonm.1.0.2 libevent.0.9.0 lwt.5.9.1 lwt_ppx.5.9.1 num.1.6 ocaml.4.14.2 ocaml-base-compiler.4.14.2 ocaml-compiler-libs.v0.12.4 ocaml-config.2 ocaml-options-vanilla.1 ocamlbuild.0.16.1 ocamlfind.1.9.8 ocplib-endian.1.2 ocurl.transition ounit2.2.2.7 parsexp.v0.16.0 pcre.8.0.5 ppx_derivers.1.2.1 ppxlib.0.35.0 seq.base sexplib.v0.16.0 sexplib0.v0.16.0 stdlib-shims.0.3.0 topkg.1.1.0 trace.0.10 uutf.1.0.4 yojson.3.0.0"ENV CI="true"ENV OCAMLCI="true"RUN opam update --depexts && opam install --cli=2.3 --depext-only -y devkit.dev $DEPSRUN opam install $DEPSCOPY --chown=1000:1000 . /srcRUN opam exec -- dune build @install @check @runtest && rm -rf _buildEND-OF-DOCKERFILEdocker build .END-REPRO-BLOCK2025-07-25 21:32.36: Using cache hint "ahrefs/devkit-ocaml/opam:fedora-42-ocaml-4.14@sha256:92a2dfcbfadc0b877c4c07531e6c17e01d81a35f590c259ac6ee644491c96ca9-fedora-42-4.14_opam-2.3-b4498e778984991834ca12483d635d13"2025-07-25 21:32.36: Using OBuilder spec:((from ocaml/opam:fedora-42-ocaml-4.14@sha256:92a2dfcbfadc0b877c4c07531e6c17e01d81a35f590c259ac6ee644491c96ca9)(comment fedora-42-4.14_opam-2.3)(user (uid 1000) (gid 1000))(env CLICOLOR_FORCE 1)(env OPAMCOLOR always)(workdir /src)(run (network host)(shell "sudo dnf install -y findutils"))(run (shell "sudo ln -f /usr/bin/opam-2.3 /usr/bin/opam"))(run (shell "opam init --reinit -ni"))(run (shell "uname -rs && opam exec -- ocaml -version && opam --version"))(workdir /src)(run (shell "sudo chown opam /src"))(run (cache (opam-archives (target /home/opam/.opam/download-cache)))(network host)(shell "cd ~/opam-repository && (git cat-file -e b8021439f8c57ba6435bc2263f6596671f4f4466 || git fetch origin master) && git reset -q --hard b8021439f8c57ba6435bc2263f6596671f4f4466 && git log --no-decorate -n1 --oneline && opam update -u"))(copy (src devkit.opam) (dst ./))(run (network host)(shell "opam pin add -yn devkit.dev './'"))(run (network host)(shell "echo '(lang dune 3.0)' > './dune-project'"))(env DEPS "astring.0.8.5 base-bigarray.base base-bytes.base base-threads.base base-unix.base camlzip.1.13 conf-libcurl.2 conf-libevent.1 conf-libpcre.2 conf-pkg-config.4 conf-zlib.1 cppo.1.8.0 csexp.1.5.2 cstruct.6.2.0 curl.0.10.0 curl_lwt.0.10.0 dune.3.19.1 dune-compiledb.0.6.0 dune-configurator.3.19.1 extlib.1.8.0 extunix.0.4.3 ezjsonm.1.3.0 fmt.0.10.0 fpath.0.7.3 hex.1.5.0 jsonm.1.0.2 libevent.0.9.0 lwt.5.9.1 lwt_ppx.5.9.1 num.1.6 ocaml.4.14.2 ocaml-base-compiler.4.14.2 ocaml-compiler-libs.v0.12.4 ocaml-config.2 ocaml-options-vanilla.1 ocamlbuild.0.16.1 ocamlfind.1.9.8 ocplib-endian.1.2 ocurl.transition ounit2.2.2.7 parsexp.v0.16.0 pcre.8.0.5 ppx_derivers.1.2.1 ppxlib.0.35.0 seq.base sexplib.v0.16.0 sexplib0.v0.16.0 stdlib-shims.0.3.0 topkg.1.1.0 trace.0.10 uutf.1.0.4 yojson.3.0.0")(env CI true)(env OCAMLCI true)(run (cache (opam-archives (target /home/opam/.opam/download-cache)))(network host)(shell "opam update --depexts && opam install --cli=2.3 --depext-only -y devkit.dev $DEPS"))(run (cache (opam-archives (target /home/opam/.opam/download-cache)))(network host)(shell "opam install $DEPS"))(copy (src .) (dst /src))(run (shell "opam exec -- dune build @install @check @runtest && rm -rf _build")))2025-07-25 21:32.36: Waiting for resource in pool OCluster2025-07-25 21:35.56: Waiting for worker…2025-07-25 21:37.42: Got resource from pool OClusterBuilding on bremusa.ocamllabs.ioAll commits already cachedHEAD is now at a249da8 initial commit(from ocaml/opam:fedora-42-ocaml-4.14@sha256:92a2dfcbfadc0b877c4c07531e6c17e01d81a35f590c259ac6ee644491c96ca9)2025-07-25 21:37.42 ---> using "ed16fac839065eed411261dd98027fc5a774a777a7cb09f621eb5f9c8e70e408" from cache/: (comment fedora-42-4.14_opam-2.3)/: (user (uid 1000) (gid 1000))/: (env CLICOLOR_FORCE 1)/: (env OPAMCOLOR always)/: (workdir /src)/src: (run (network host)(shell "sudo dnf install -y findutils"))Updating and loading repositories:Fedora 42 openh264 (From Cisco) - x86_ 100% | 6.6 KiB/s | 986.0 B | 00m00sFedora 42 - x86_64 - Updates 100% | 189.9 KiB/s | 25.1 KiB | 00m00sFedora 42 - x86_64 100% | 216.9 KiB/s | 26.0 KiB | 00m00sFedora 42 - x86_64 - Updates 100% | 4.4 MiB/s | 4.3 MiB | 00m01sRepositories loaded.Package "findutils-1:4.10.0-5.fc42.x86_64" is already installed.Nothing to do.2025-07-25 21:37.42 ---> using "0f727d8e6b4922459793d6ee82ac3325992f2fce053926a6761b95ae4a580d35" from cache/src: (run (shell "sudo ln -f /usr/bin/opam-2.3 /usr/bin/opam"))2025-07-25 21:37.42 ---> using "8cbba7add5ad330639653b419d7ab94b6e2a15e174401f8c13c979cc732f7456" from cache/src: (run (shell "opam init --reinit -ni"))Configuring from /home/opam/.opamrc and then from built-in defaults.Checking for available remotes: rsync and local, git.- you won't be able to use mercurial repositories unless you install the hg command on your system.- you won't be able to use darcs repositories unless you install the darcs command on your system.This development version of opam requires an update to the layout of /home/opam/.opam from version 2.0 to version 2.2, which can't be reverted.You may want to back it up before going further.Continue? [y/n] yFormat upgrade done.<><> Updating repositories ><><><><><><><><><><><><><><><><><><><><><><><><><><>[default] Initialised2025-07-25 21:38.01 ---> saved as "e10b4ac3ec769b1d8261edaa737089af50b2f0fbb8906d0c0a4548f2489de52d"/src: (run (shell "uname -rs && opam exec -- ocaml -version && opam --version"))Linux 6.8.0-63-genericThe OCaml toplevel, version 4.14.22.3.02025-07-25 21:38.01 ---> saved as "b3dffb3ff06fcff9299c46485bd7509ac0775759abdb1876a07729d2f1191664"/src: (workdir /src)/src: (run (shell "sudo chown opam /src"))2025-07-25 21:38.02 ---> saved as "7d0dd958de6f888928813b3c6cec0ba0dc0f0cd4aca0bacbb5859159c41f76a9"/src: (run (cache (opam-archives (target /home/opam/.opam/download-cache)))(network host)(shell "cd ~/opam-repository && (git cat-file -e b8021439f8c57ba6435bc2263f6596671f4f4466 || git fetch origin master) && git reset -q --hard b8021439f8c57ba6435bc2263f6596671f4f4466 && git log --no-decorate -n1 --oneline && opam update -u"))From https://github.com/ocaml/opam-repository* branch master -> FETCH_HEAD6dea2f9390..b8021439f8 master -> origin/masterb8021439f8 Merge pull request #28261 from kit-ty-kate/deploy-fix-25819<><> Updating package repositories ><><><><><><><><><><><><><><><><><><><><><><>[default] synchronised from git+file:///home/opam/opam-repositoryThe following actions will be performed:=== recompile 2 packages- recompile ocaml 4.14.2 [upstream or system changes]- recompile opam-depext 1.2.3 [uses ocaml]<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>-> retrieved opam-depext.1.2.3 (cached)-> removed opam-depext.1.2.3-> removed ocaml.4.14.2-> installed ocaml.4.14.2-> installed opam-depext.1.2.3Done.<><> opam-depext.1.2.3 installed successfully <><><><><><><><><><><><><><><><><>=> opam-depext is unnecessary when used with opam >= 2.1. Please use opam install directly instead# To update the current shell environment, run: eval $(opam env)2025-07-25 21:38.38 ---> saved as "6ca20e70b91c5c4b9e11c17906f62f674a63189ea3286455c891c8a1a6c0cf9c"/src: (copy (src devkit.opam) (dst ./))2025-07-25 21:38.39 ---> saved as "10ae356634f06e687831e11e6ada24198f804e01b4bdb328addfc4a9f153b161"/src: (run (network host)(shell "opam pin add -yn devkit.dev './'"))[devkit.dev] synchronised (file:///src)devkit is now pinned to file:///src (version dev)2025-07-25 21:38.40 ---> saved as "8f66b4c318f96155516f6b5b9b49c133472b99eb4ed937a11e2e70d7a7f7e112"/src: (run (network host)(shell "echo '(lang dune 3.0)' > './dune-project'"))2025-07-25 21:38.41 ---> saved as "03d8f4b2b390f76237d1c924af77cc1787f1761ada890c96d447a8838bab9172"/src: (env DEPS "astring.0.8.5 base-bigarray.base base-bytes.base base-threads.base base-unix.base camlzip.1.13 conf-libcurl.2 conf-libevent.1 conf-libpcre.2 conf-pkg-config.4 conf-zlib.1 cppo.1.8.0 csexp.1.5.2 cstruct.6.2.0 curl.0.10.0 curl_lwt.0.10.0 dune.3.19.1 dune-compiledb.0.6.0 dune-configurator.3.19.1 extlib.1.8.0 extunix.0.4.3 ezjsonm.1.3.0 fmt.0.10.0 fpath.0.7.3 hex.1.5.0 jsonm.1.0.2 libevent.0.9.0 lwt.5.9.1 lwt_ppx.5.9.1 num.1.6 ocaml.4.14.2 ocaml-base-compiler.4.14.2 ocaml-compiler-libs.v0.12.4 ocaml-config.2 ocaml-options-vanilla.1 ocamlbuild.0.16.1 ocamlfind.1.9.8 ocplib-endian.1.2 ocurl.transition ounit2.2.2.7 parsexp.v0.16.0 pcre.8.0.5 ppx_derivers.1.2.1 ppxlib.0.35.0 seq.base sexplib.v0.16.0 sexplib0.v0.16.0 stdlib-shims.0.3.0 topkg.1.1.0 trace.0.10 uutf.1.0.4 yojson.3.0.0")/src: (env CI true)/src: (env OCAMLCI true)/src: (run (cache (opam-archives (target /home/opam/.opam/download-cache)))(network host)(shell "opam update --depexts && opam install --cli=2.3 --depext-only -y devkit.dev $DEPS"))+ /usr/sbin/sudo "yum" "makecache"- Updating and loading repositories:- Repositories loaded.- Metadata cache created.<><> Synchronising pinned packages ><><><><><><><><><><><><><><><><><><><><><><>[devkit.dev] synchronised (file:///src)[NOTE] Package ocaml-options-vanilla is already installed (current version is 1).[NOTE] Package ocaml-config is already installed (current version is 2).[NOTE] Package ocaml-base-compiler is already installed (current version is 4.14.2).[NOTE] Package ocaml is already installed (current version is 4.14.2).[NOTE] Package base-unix is already installed (current version is base).[NOTE] Package base-threads is already installed (current version is base).[NOTE] Package base-bigarray is already installed (current version is base).The following system packages will first need to be installed:libcurl-devel libevent-devel pcre-devel zlib-ng-compat-devel<><> Handling external dependencies <><><><><><><><><><><><><><><><><><><><><><>+ /usr/sbin/sudo "yum" "install" "-y" "libcurl-devel" "libevent-devel" "pcre-devel" "zlib-ng-compat-devel"- Updating and loading repositories:- Repositories loaded.- Package Arch Version Repository Size- Upgrading:- openssl-libs x86_64 1:3.2.4-4.fc42 updates 7.8 MiB- replacing openssl-libs x86_64 1:3.2.4-3.fc42 246cdb30ef85449492e293d8d154e1f0 7.8 MiB- Installing:- libcurl-devel x86_64 8.11.1-5.fc42 updates 1.3 MiB- libevent-devel x86_64 2.1.12-15.fc42 fedora 426.0 KiB- pcre-devel x86_64 8.45-1.fc42.8 fedora 1.7 MiB- zlib-ng-compat-devel x86_64 2.2.4-3.fc42 fedora 107.0 KiB- Installing dependencies:- brotli x86_64 1.1.0-6.fc42 fedora 31.6 KiB- brotli-devel x86_64 1.1.0-6.fc42 fedora 65.6 KiB- cmake-filesystem x86_64 3.31.6-2.fc42 fedora 0.0 B- keyutils-libs-devel x86_64 1.6.3-5.fc42 fedora 48.2 KiB- krb5-devel x86_64 1.21.3-6.fc42 updates 705.9 KiB- libcom_err-devel x86_64 1.47.2-3.fc42 fedora 16.7 KiB- libidn2-devel x86_64 2.3.8-1.fc42 fedora 149.1 KiB- libkadm5 x86_64 1.21.3-6.fc42 updates 213.9 KiB- libnghttp2-devel x86_64 1.64.0-3.fc42 fedora 295.4 KiB- libpsl-devel x86_64 0.21.5-5.fc42 fedora 110.3 KiB- libselinux-devel x86_64 3.8-2.fc42 updates 126.8 KiB- libsepol-devel x86_64 3.8-1.fc42 fedora 120.8 KiB- libssh-devel x86_64 0.11.2-1.fc42 updates 178.0 KiB- libverto-devel x86_64 0.3.2-10.fc42 fedora 25.7 KiB- openssl-devel x86_64 1:3.2.4-4.fc42 updates 4.3 MiB- pcre x86_64 8.45-1.fc42.8 fedora 537.6 KiB- pcre-cpp x86_64 8.45-1.fc42.8 fedora 48.1 KiB- pcre-utf16 x86_64 8.45-1.fc42.8 fedora 494.2 KiB- pcre-utf32 x86_64 8.45-1.fc42.8 fedora 466.2 KiB- pcre2-devel x86_64 10.45-1.fc42 fedora 2.1 MiB- pcre2-utf16 x86_64 10.45-1.fc42 fedora 626.3 KiB- pcre2-utf32 x86_64 10.45-1.fc42 fedora 598.2 KiB- publicsuffix-list noarch 20250616-1.fc42 updates 332.8 KiB-- Transaction Summary:- Installing: 27 packages- Upgrading: 1 package- Replacing: 1 package-- Total size of inbound packages is 9 MiB. Need to download 9 MiB.- After this operation, 15 MiB extra will be used (install 23 MiB, remove 8 MiB).- [ 1/28] libevent-devel-0:2.1.12-15.fc42 100% | 980.0 KiB/s | 100.0 KiB | 00m00s- [ 2/28] libcurl-devel-0:8.11.1-5.fc42.x 100% | 5.9 MiB/s | 881.9 KiB | 00m00s- [ 3/28] pcre-devel-0:8.45-1.fc42.8.x86_ 100% | 3.1 MiB/s | 489.7 KiB | 00m00s- [ 4/28] pcre-0:8.45-1.fc42.8.x86_64 100% | 3.6 MiB/s | 205.5 KiB | 00m00s- [ 5/28] pcre-cpp-0:8.45-1.fc42.8.x86_64 100% | 917.8 KiB/s | 26.6 KiB | 00m00s- [ 6/28] pcre-utf16-0:8.45-1.fc42.8.x86_ 100% | 6.2 MiB/s | 191.2 KiB | 00m00s- [ 7/28] pcre-utf32-0:8.45-1.fc42.8.x86_ 100% | 5.8 MiB/s | 179.1 KiB | 00m00s- [ 8/28] cmake-filesystem-0:3.31.6-2.fc4 100% | 517.4 KiB/s | 17.6 KiB | 00m00s- [ 9/28] zlib-ng-compat-devel-0:2.2.4-3. 100% | 768.5 KiB/s | 38.4 KiB | 00m00s- [10/28] krb5-devel-0:1.21.3-6.fc42.x86_ 100% | 2.7 MiB/s | 142.5 KiB | 00m00s- [11/28] libkadm5-0:1.21.3-6.fc42.x86_64 100% | 1.9 MiB/s | 76.4 KiB | 00m00s- [12/28] libssh-devel-0:0.11.2-1.fc42.x8 100% | 1.4 MiB/s | 41.5 KiB | 00m00s- [13/28] brotli-0:1.1.0-6.fc42.x86_64 100% | 767.2 KiB/s | 19.9 KiB | 00m00s- [14/28] brotli-devel-0:1.1.0-6.fc42.x86 100% | 737.6 KiB/s | 33.9 KiB | 00m00s- [15/28] libidn2-devel-0:2.3.8-1.fc42.x8 100% | 2.2 MiB/s | 64.0 KiB | 00m00s- [16/28] libnghttp2-devel-0:1.64.0-3.fc4 100% | 2.4 MiB/s | 55.7 KiB | 00m00s- [17/28] libpsl-devel-0:0.21.5-5.fc42.x8 100% | 1.9 MiB/s | 33.2 KiB | 00m00s- [18/28] libsepol-devel-0:3.8-1.fc42.x86 100% | 1.2 MiB/s | 48.4 KiB | 00m00s- [19/28] libselinux-devel-0:3.8-2.fc42.x 100% | 2.6 MiB/s | 151.5 KiB | 00m00s- [20/28] keyutils-libs-devel-0:1.6.3-5.f 100% | 3.9 MiB/s | 59.9 KiB | 00m00s- [21/28] libcom_err-devel-0:1.47.2-3.fc4 100% | 697.3 KiB/s | 16.7 KiB | 00m00s- [22/28] libverto-devel-0:0.3.2-10.fc42. 100% | 436.3 KiB/s | 14.4 KiB | 00m00s- [23/28] publicsuffix-list-0:20250616-1. 100% | 1.5 MiB/s | 89.9 KiB | 00m00s- [24/28] pcre2-devel-0:10.45-1.fc42.x86_ 100% | 6.8 MiB/s | 543.4 KiB | 00m00s- [25/28] openssl-devel-1:3.2.4-4.fc42.x8 100% | 9.7 MiB/s | 2.8 MiB | 00m00s- [26/28] pcre2-utf32-0:10.45-1.fc42.x86_ 100% | 4.0 MiB/s | 228.7 KiB | 00m00s- [27/28] pcre2-utf16-0:10.45-1.fc42.x86_ 100% | 2.0 MiB/s | 241.9 KiB | 00m00s- [28/28] openssl-libs-1:3.2.4-4.fc42.x86 100% | 9.8 MiB/s | 2.3 MiB | 00m00s- --------------------------------------------------------------------------------- [28/28] Total 100% | 7.9 MiB/s | 9.0 MiB | 00m01s- Running transaction- [ 1/31] Verify package files 100% | 202.0 B/s | 28.0 B | 00m00s- [ 2/31] Prepare transaction 100% | 110.0 B/s | 29.0 B | 00m00s- [ 3/31] Upgrading openssl-libs-1:3.2.4- 100% | 75.9 MiB/s | 7.8 MiB | 00m00s- [ 4/31] Installing cmake-filesystem-0:3 100% | 948.7 KiB/s | 7.6 KiB | 00m00s- [ 5/31] Installing pcre-0:8.45-1.fc42.8 100% | 58.6 MiB/s | 539.9 KiB | 00m00s- [ 6/31] Installing pcre-cpp-0:8.45-1.fc 100% | 11.9 MiB/s | 48.9 KiB | 00m00s- [ 7/31] Installing zlib-ng-compat-devel 100% | 21.2 MiB/s | 108.5 KiB | 00m00s- [ 8/31] Installing libssh-devel-0:0.11. 100% | 29.4 MiB/s | 180.6 KiB | 00m00s- [ 9/31] Installing libkadm5-0:1.21.3-6. 100% | 7.3 MiB/s | 215.9 KiB | 00m00s- [10/31] Installing openssl-devel-1:3.2. 100% | 45.9 MiB/s | 5.2 MiB | 00m00s- [11/31] Installing pcre2-utf32-0:10.45- 100% | 58.5 MiB/s | 599.1 KiB | 00m00s- [12/31] Installing pcre2-utf16-0:10.45- 100% | 51.0 MiB/s | 627.1 KiB | 00m00s- [13/31] Installing pcre2-devel-0:10.45- 100% | 41.9 MiB/s | 2.1 MiB | 00m00s- [14/31] Installing publicsuffix-list-0: 100% | 54.3 MiB/s | 333.8 KiB | 00m00s- [15/31] Installing libpsl-devel-0:0.21. 100% | 37.0 MiB/s | 113.6 KiB | 00m00s- [16/31] Installing libverto-devel-0:0.3 100% | 12.9 MiB/s | 26.4 KiB | 00m00s- [17/31] Installing libcom_err-devel-0:1 100% | 507.6 KiB/s | 18.3 KiB | 00m00s- [18/31] Installing keyutils-libs-devel- 100% | 18.0 MiB/s | 55.2 KiB | 00m00s- [19/31] Installing libsepol-devel-0:3.8 100% | 12.5 MiB/s | 128.3 KiB | 00m00s- [20/31] Installing libselinux-devel-0:3 100% | 19.7 MiB/s | 161.6 KiB | 00m00s- [21/31] Installing krb5-devel-0:1.21.3- 100% | 14.5 MiB/s | 715.2 KiB | 00m00s- [22/31] Installing libnghttp2-devel-0:1 100% | 57.9 MiB/s | 296.5 KiB | 00m00s- [23/31] Installing libidn2-devel-0:2.3. 100% | 38.3 MiB/s | 156.7 KiB | 00m00s- [24/31] Installing brotli-0:1.1.0-6.fc4 100% | 922.8 KiB/s | 32.3 KiB | 00m00s- [25/31] Installing brotli-devel-0:1.1.0 100% | 16.6 MiB/s | 68.0 KiB | 00m00s- [26/31] Installing pcre-utf32-0:8.45-1. 100% | 57.1 MiB/s | 467.9 KiB | 00m00s- [27/31] Installing pcre-utf16-0:8.45-1. 100% | 60.5 MiB/s | 495.9 KiB | 00m00s- [28/31] Installing pcre-devel-0:8.45-1. 100% | 37.4 MiB/s | 1.7 MiB | 00m00s- [29/31] Installing libcurl-devel-0:8.11 100% | 27.2 MiB/s | 1.4 MiB | 00m00s- [30/31] Installing libevent-devel-0:2.1 100% | 9.4 MiB/s | 432.3 KiB | 00m00s- [31/31] Removing openssl-libs-1:3.2.4-3 100% | 246.0 B/s | 38.0 B | 00m00s- Complete!+ /usr/sbin/rpm "-q" "--whatprovides" "libcurl-devel" "libevent-devel" "pcre-devel" "zlib-ng-compat-devel"- libcurl-devel-8.11.1-5.fc42.x86_64- libevent-devel-2.1.12-15.fc42.x86_64- pcre-devel-8.45-1.fc42.8.x86_64- zlib-ng-compat-devel-2.2.4-3.fc42.x86_642025-07-25 21:39.01 ---> saved as "8565d8e300dad9d0ebac29801ae1157a9d703be06e35550a0ee17279f036e7d0"/src: (run (cache (opam-archives (target /home/opam/.opam/download-cache)))(network host)(shell "opam install $DEPS"))[NOTE] Package ocaml-options-vanilla is already installed (current version is 1).[NOTE] Package ocaml-config is already installed (current version is 2).[NOTE] Package ocaml-base-compiler is already installed (current version is 4.14.2).[NOTE] Package ocaml is already installed (current version is 4.14.2).[NOTE] Package base-unix is already installed (current version is base).[NOTE] Package base-threads is already installed (current version is base).[NOTE] Package base-bigarray is already installed (current version is base).The following actions will be performed:=== install 45 packages- install astring 0.8.5- install base-bytes base- install camlzip 1.13- install conf-libcurl 2- install conf-libevent 1- install conf-libpcre 2- install conf-pkg-config 4- install conf-zlib 1- install cppo 1.8.0- install csexp 1.5.2- install cstruct 6.2.0- install curl 0.10.0- install curl_lwt 0.10.0- install dune 3.19.1- install dune-compiledb 0.6.0- install dune-configurator 3.19.1- install extlib 1.8.0- install extunix 0.4.3- install ezjsonm 1.3.0- install fmt 0.10.0- install fpath 0.7.3- install hex 1.5.0- install jsonm 1.0.2- install libevent 0.9.0- install lwt 5.9.1- install lwt_ppx 5.9.1- install num 1.6- install ocaml-compiler-libs v0.12.4- install ocamlbuild 0.16.1- install ocamlfind 1.9.8- install ocplib-endian 1.2- install ocurl transition (deprecated)- install ounit2 2.2.7- install parsexp v0.16.0- install pcre 8.0.5- install ppx_derivers 1.2.1- install ppxlib 0.35.0- install seq base- install sexplib v0.16.0- install sexplib0 v0.16.0- install stdlib-shims 0.3.0- install topkg 1.1.0- install trace 0.10- install uutf 1.0.4- install yojson 3.0.0<><> Processing actions <><><><><><><><><><><><><><><><><><><><><><><><><><><><>-> retrieved camlzip.1.13 (cached)-> retrieved astring.0.8.5 (cached)-> retrieved cppo.1.8.0 (cached)-> installed conf-libcurl.2-> installed conf-pkg-config.4-> retrieved csexp.1.5.2 (cached)-> retrieved cstruct.6.2.0 (cached)-> retrieved curl.0.10.0, curl_lwt.0.10.0, ocurl.transition (cached)-> installed conf-libevent.1-> installed conf-libpcre.2-> installed conf-zlib.1-> retrieved dune-compiledb.0.6.0 (cached)-> retrieved extlib.1.8.0 (cached)-> retrieved ezjsonm.1.3.0 (cached)-> retrieved extunix.0.4.3 (cached)-> retrieved fmt.0.10.0 (cached)-> retrieved fpath.0.7.3 (cached)-> retrieved hex.1.5.0 (cached)-> retrieved jsonm.1.0.2 (cached)-> retrieved libevent.0.9.0 (cached)-> retrieved num.1.6 (cached)-> retrieved lwt.5.9.1, lwt_ppx.5.9.1 (cached)-> retrieved ocaml-compiler-libs.v0.12.4 (cached)-> retrieved ocamlbuild.0.16.1 (cached)-> retrieved ocamlfind.1.9.8 (cached)-> retrieved ocplib-endian.1.2 (cached)-> retrieved ounit2.2.2.7 (cached)-> retrieved parsexp.v0.16.0 (cached)-> retrieved pcre.8.0.5 (cached)-> retrieved ppx_derivers.1.2.1 (cached)-> retrieved seq.base (cached)-> installed seq.base-> retrieved sexplib.v0.16.0 (cached)-> retrieved sexplib0.v0.16.0 (cached)-> retrieved stdlib-shims.0.3.0 (cached)-> retrieved topkg.1.1.0 (cached)-> retrieved trace.0.10 (cached)-> retrieved uutf.1.0.4 (cached)-> retrieved yojson.3.0.0 (cached)-> retrieved dune.3.19.1, dune-configurator.3.19.1 (cached)-> installed num.1.6-> retrieved ppxlib.0.35.0 (cached)-> installed ocamlbuild.0.16.1-> installed ocamlfind.1.9.8-> installed base-bytes.base-> installed libevent.0.9.0-> installed camlzip.1.13-> installed topkg.1.1.0-> installed uutf.1.0.4-> installed fmt.0.10.0-> installed astring.0.8.5-> installed jsonm.1.0.2-> installed fpath.0.7.3-> installed dune.3.19.1-> installed stdlib-shims.0.3.0-> installed ppx_derivers.1.2.1-> installed csexp.1.5.2-> installed cppo.1.8.0-> installed cstruct.6.2.0-> installed ocaml-compiler-libs.v0.12.4-> installed sexplib0.v0.16.0-> installed ounit2.2.2.7-> installed hex.1.5.0-> installed trace.0.10-> installed yojson.3.0.0-> installed ocplib-endian.1.2-> installed ezjsonm.1.3.0-> installed extlib.1.8.0-> installed parsexp.v0.16.0-> installed dune-configurator.3.19.1-> installed sexplib.v0.16.0-> installed dune-compiledb.0.6.0-> installed pcre.8.0.5-> installed curl.0.10.0-> installed lwt.5.9.1-> installed curl_lwt.0.10.0-> installed ocurl.transition-> installed ppxlib.0.35.0-> installed lwt_ppx.5.9.1-> installed extunix.0.4.3Done.<><> ocurl.transition installed successfully ><><><><><><><><><><><><><><><><><>=> Note: This package is deprecated.=> ocurl has been renamed and the ocurl package is now a transition package. Use the curl package instead.# To update the current shell environment, run: eval $(opam env)2025-07-25 21:41.14 ---> saved as "fbeb263174928a1350f829816a719ab3865a66f083506430aa599599080cfd34"/src: (copy (src .) (dst /src))2025-07-25 21:41.15 ---> saved as "afbd47867fbcb76383834dee7d39fb520dd563a8875154f63df4f78314cb4e0a"/src: (run (shell "opam exec -- dune build @install @check @runtest && rm -rf _build"))(cd _build/default && /home/opam/.opam/4.14/bin/ocamlc.opt -w @1..3@5..28@30..39@43@46..47@49..57@61..62-40 -strict-sequence -strict-formats -short-paths -keep-locs -g -bin-annot -I .devkit_core.objs/byte -I /home/opam/.opam/4.14/lib/curl -I /home/opam/.opam/4.14/lib/curl_lwt -I /home/opam/.opam/4.14/lib/extlib -I /home/opam/.opam/4.14/lib/extunix -I /home/opam/.opam/4.14/lib/libevent -I /home/opam/.opam/4.14/lib/lwt -I /home/opam/.opam/4.14/lib/lwt/unix -I /home/opam/.opam/4.14/lib/ocaml/threads -I /home/opam/.opam/4.14/lib/pcre -I /home/opam/.opam/4.14/lib/stdlib-shims -I /home/opam/.opam/4.14/lib/trace/core -I /home/opam/.opam/4.14/lib/yojson -I /home/opam/.opam/4.14/lib/zip -I ocamlnet_lite/.ocamlnet_lite.objs/byte -intf-suffix .ml -no-alias-deps -opaque -open Devkit_core -o .devkit_core.objs/byte/devkit_core__Possibly_otel.cmo -c -impl possibly_otel.ml)File "possibly_otel.stub.ml", line 9, characters 2-39:Error (alert deprecated): Trace_core.enter_manual_toplevel_spanuse enter_manual_span(cd _build/default && /home/opam/.opam/4.14/bin/ocamlopt.opt -w @1..3@5..28@30..39@43@46..47@49..57@61..62-40 -strict-sequence -strict-formats -short-paths -keep-locs -g -I .devkit_core.objs/byte -I .devkit_core.objs/native -I /home/opam/.opam/4.14/lib/curl -I /home/opam/.opam/4.14/lib/curl_lwt -I /home/opam/.opam/4.14/lib/extlib -I /home/opam/.opam/4.14/lib/extunix -I /home/opam/.opam/4.14/lib/libevent -I /home/opam/.opam/4.14/lib/lwt -I /home/opam/.opam/4.14/lib/lwt/unix -I /home/opam/.opam/4.14/lib/ocaml/threads -I /home/opam/.opam/4.14/lib/pcre -I /home/opam/.opam/4.14/lib/stdlib-shims -I /home/opam/.opam/4.14/lib/trace/core -I /home/opam/.opam/4.14/lib/yojson -I /home/opam/.opam/4.14/lib/zip -I ocamlnet_lite/.ocamlnet_lite.objs/byte -I ocamlnet_lite/.ocamlnet_lite.objs/native -intf-suffix .ml -no-alias-deps -opaque -open Devkit_core -o .devkit_core.objs/native/devkit_core__Possibly_otel.cmx -c -impl possibly_otel.ml)File "possibly_otel.stub.ml", line 9, characters 2-39:Error (alert deprecated): Trace_core.enter_manual_toplevel_spanuse enter_manual_span(cd _build/default && /home/opam/.opam/4.14/bin/ocamlc.opt -w @1..3@5..28@30..39@43@46..47@49..57@61..62-40 -strict-sequence -strict-formats -short-paths -keep-locs -g -bin-annot -I .devkit_core.objs/byte -I /home/opam/.opam/4.14/lib/curl -I /home/opam/.opam/4.14/lib/curl_lwt -I /home/opam/.opam/4.14/lib/extlib -I /home/opam/.opam/4.14/lib/extunix -I /home/opam/.opam/4.14/lib/libevent -I /home/opam/.opam/4.14/lib/lwt -I /home/opam/.opam/4.14/lib/lwt/unix -I /home/opam/.opam/4.14/lib/ocaml/threads -I /home/opam/.opam/4.14/lib/pcre -I /home/opam/.opam/4.14/lib/stdlib-shims -I /home/opam/.opam/4.14/lib/trace/core -I /home/opam/.opam/4.14/lib/yojson -I /home/opam/.opam/4.14/lib/zip -I ocamlnet_lite/.ocamlnet_lite.objs/byte -intf-suffix .ml -no-alias-deps -opaque -open Devkit_core -o .devkit_core.objs/byte/devkit_core__Command_pipe.cmo -c -impl command_pipe.ml)File "command_pipe.ml", line 2, characters 5-11:2 | open Devkit^^^^^^Error: Unbound module Devkit(cd _build/default && /home/opam/.opam/4.14/bin/ocamlopt.opt -w @1..3@5..28@30..39@43@46..47@49..57@61..62-40 -strict-sequence -strict-formats -short-paths -keep-locs -g -I .devkit_core.objs/byte -I .devkit_core.objs/native -I /home/opam/.opam/4.14/lib/curl -I /home/opam/.opam/4.14/lib/curl_lwt -I /home/opam/.opam/4.14/lib/extlib -I /home/opam/.opam/4.14/lib/extunix -I /home/opam/.opam/4.14/lib/libevent -I /home/opam/.opam/4.14/lib/lwt -I /home/opam/.opam/4.14/lib/lwt/unix -I /home/opam/.opam/4.14/lib/ocaml/threads -I /home/opam/.opam/4.14/lib/pcre -I /home/opam/.opam/4.14/lib/stdlib-shims -I /home/opam/.opam/4.14/lib/trace/core -I /home/opam/.opam/4.14/lib/yojson -I /home/opam/.opam/4.14/lib/zip -I ocamlnet_lite/.ocamlnet_lite.objs/byte -I ocamlnet_lite/.ocamlnet_lite.objs/native -intf-suffix .ml -no-alias-deps -opaque -open Devkit_core -o .devkit_core.objs/native/devkit_core__Command_pipe.cmx -c -impl command_pipe.ml)File "command_pipe.ml", line 2, characters 5-11:2 | open Devkit^^^^^^Error: Unbound module Devkit"/usr/bin/env" "bash" "-c" "opam exec -- dune build @install @check @runtest && rm -rf _build" failed with exit status 12025-07-25 21:41.22: Job failed: Failed: Build failed